Section to manage devices. Connect the Device to a ONE-Driver, Data port and Audio in- and outputs.
Defined devices
Shows a list of current devices. Add, Delete or Copy a Device by using the buttons at the bottom of the list.
Device properties
Enabled
To enable/disable the device for usage.
Name
Field to give the Device a name.
Reference
Field to give the Device a (unique) reference.
Device type
Dropdown selector to select the
Identification
Label
Shown in the CAB-Controller for identification.
Info text
Shown in the CAB-Controller for identification.
Default fader label (4 characters)
Shown in the CAB-Controller for identification.
Default fader label (8 characters)
Default fader label (16 characters)
Remote control
Controlled via ONE-Driver
Dropdown list to select the ONE-Driver that controls this Device.
Control data port
Dropdown list to select the Data port that controls this Device.
Control chain
Dropdown list to select the Control chain that controls this Device.
Chain device ID
Dropdown list to select a Chain device ID.
Audio
Audio interface type
Dropdown list to select the Audio interface type for this Device.
Connected to audio router
Dropdown list to select the Router device where this Device is connected to.
Router in- and outputs
Dropdown lists to select the default in- and outputs for this device.
Audio channel(s) used by this device
Selector to set the number of audio channels for this device.
Infrastructure
Connection type
Dropdown list to select the network type that is used by this device.
Identification / Login / Remote
Machine name / host name
Field to provide the location of the remote control application.
Username
Field to provide the user name of the account.
Password
Field to provide the password of the account.
Web interface URL
Field to provide the URL to the webinterface of the device.
Options
Automatic accept of incoming connections
When not enabled, the device will Ring until accepted (depending on device settings).
Adjust codec settings to incoming phone book connections
Automatically add the codec settings when the incoming call is (automatically) added to the phone book.
Disable dragging device to fader
Prevent the dragging of this Device to a fader (when using fader routing).
Disable return signal selection
Prevent the change of a return signal for this Device.
Number of CLI digits to match (0 = all)
Selector to set the number of digits.